Canon PRO-10 Series Manual page 167

Digital Printing Workflow
Techniques for Specific Objectives
Digital Photo Printing Guide > Utilizing Print Studio Pro
B015
Printing with an Impression Close to That on the Monitor
In Print Studio Pro, you can print with an impression close to that on the monitor by correctly reflecting
the characteristics of the data displayed on the monitor.
You do not need to make test prints or adjustments repeatedly since you can develop/correct photos
while previewing the print results on the monitor.
Monitor Settings and Ambient Light Recommended by Canon
When using this function, it is recommended that you set the monitor and ambient light as
follows.
Monitor
Color temperature: D50 (5000 K)
Luminance: 120 cd/m2
Gamma: 2.2
Ambient light
D50 fluorescent lamps designed for color evaluation (color temperature: 5000 K, high color
rendering properties)
Brightness when viewing printed materials: 500 lx ± 125 lx
Select a color mode according to the color space of the image to be printed. Canon recommends the
following combinations.
Color Space
Adobe RGB
sRGB
Note
When PRO Mode is selected for images whose color space is other than sRGB, Print Studio
Pro converts it to an appropriate color space automatically.
Tip
Color Management Basics
> Printing with an Impression Close to That on the Monitor
Color Mode
Use ICC Profile (Rendering Intent: Perceptual)
PRO Mode
Utilizing Print Studio Pro
Useful Information