Canon PRO-10 Series Manual page 475

extension.
Important
When Amount of Extension is set to Large, the back of paper may become stained.
When Amount of Extension is set to Small or None, margins may appear depending on
the size of the paper.
Adjust Print Position
If the image on the printed sticker or disc label is out of position, you can adjust the print position. You
can adjust the print position in 0.01 inch or 0.1 mm increments within the following ranges.
Stickers: -0.08 inch (-2.0 mm) to +0.08 inch (+2.0 mm)
Disc Label: -0.2 inch (-5.0 mm) to +0.2 inch (+5.0 mm)
Vertical
You can adjust the print position in the vertical direction.
Set a positive value to move upward or set a negative value to move downward.
Horizontal
You can adjust the print position in the horizontal direction.
Set a positive value to move left or set a negative value to move right.
Advanced Settings
Image Correction
Select Enable Auto Photo Fix to apply corrections automatically; select No correction if you do
not want to do so. Select Enable Auto Photo Fix to set the following.