Canon PRO-10 Series Manual page 522

Home > Overview of the Printer
Settings > Changing the Settings in the Wired LAN Sheet
N016
Changing the Settings in the Wired LAN Sheet
Note
To change the settings in the Wired LAN sheet, follow the procedure below to activate wired LAN.
1. Press and hold the RESUME/CANCEL button until the POWER lamp flashes 11 times.
2. Release the RESUME/CANCEL button.
1.
Start up IJ Network Tool.
Starting up IJ Network Tool
2.
Select the printer in Printers:.
3.
Click the Configuration button.
4.
Click the Wired LAN button.
5.
Change the settings or confirm.
Click OK after changing configuration. A screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted
Settings screen is displayed.
1. TCP/IP Setting:
Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.
Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
functionality must be enabled on your router.
> About Network Communication > Changing and Confirming Network