Canon PRO-10 Series Manual page 626

Home > Printing > Printing from a Computer
Driver) > Various Printing Methods
P008
Switching the Paper Source to Match the Purpose
In this printer, there are two paper sources, a manual feed tray and a rear tray.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1.
Select Quality & Media from the pop-up menu of the
2.
Select the media type
For Media Type, select the same paper type loaded in the printer.
Note
When Other Glossy Paper (Wide Margins), Fine Art "Museum Etching", Other Fine Art
Paper 1, Other Fine Art Paper 2, or Canvas is selected for Media Type in the Print Dialog,
select "XXX (Art Paper Margin 30)" for Paper Size.
3.
Select the paper source
For Paper Source, select the item below that matches your purpose.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Important
When 4 x 6, 5 x 7, A5, JIS B5 (B5 JIS, JB5), or L is selected for Paper Size on the Print Dialog,
paper cannot be supplied from the manual feed tray in the back.
When Plain Paper is selected from the Media Type menu of the Quality & Media on the pop-up
menu in the Print dialog, paper cannot be supplied from the manual feed tray in the back.
> Printing with Application Software that You are Using (Printer
> Switching the Paper Source to Match the Purpose
Print Dialog