Canon PRO-10 Series Manual page 775

Hide thumbs Also See for PRO-10 Series:

Table of Contents

Troubleshooting

Problems with Printing Quality

Print Results Not Satisfactory

If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the

paper and print quality settings first.

Check 1: Do the page size and media type settings match the size and

type of the loaded paper?

When these settings are incorrect, you cannot obtain a proper print result.

If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality

of the printout color.

Also, if you print with an incorrect paper type setting, the printed surface may be scratched.

In borderless printing, uneven coloring may occur depending on the combination of the paper type

setting and the loaded paper.

To print from a PictBridge compliant

To print from a computer

Check 2: Make sure that the appropriate print quality is selected using

the printer driver.

Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven

colors, increase the print quality setting and try printing again.

You can confirm the print quality setting using the printer driver.

Changing the Print Quality and Correcting Image Data

You cannot change the print quality setting from a PictBridge compliant device.

Check 3: When using wireless LAN, make sure that the radio status is

Monitoring Wireless Network Status

If the radio status is poor, it may be possible that print results are not satisfactory or the printing speed

is slow. Try printing again after the radio status improves.

If the problem is not resolved even after the radio status improves, use the printer via USB or a wired

Check 4: If the problem is not resolved, there may be other causes.

Table of Contents