Canon PRO-10 Series Manual page 810

Home > Troubleshooting > About Errors/Messages Displayed
Compliant Device
U334
Error Message Appears on a PictBridge Compliant Device
The following are the possible errors that may occur when printing directly from a PictBridge compliant
device and the countermeasures to clear them.
Note
This section describes errors that are indicated on Canon-brand PictBridge compliant devices. The
error messages and operations may vary depending on the device you are using. For errors on
non-Canon PictBridge compliant devices, check the status of the Alarm lamp and take the
appropriate action to clear the error. For details, see
For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message on the PictBridge
Compliant Device
"Printer in use"
"No paper"
"Paper Error"
"Paper jam"
"Printer cover open"
"No print head"
"Waste tank full"/"Ink absorber full"
"No ink"/"Ink cassette error"
> Error Message Appears on a PictBridge
Alarm Lamp Flashes
If the printer is printing from the computer or warming up,
wait until the job ends.
When it is ready, the printer starts printing automatically.
If you replace an ink tank while printing from a PictBridge
compliant device, press the RESUME/CANCEL button on
the printer to clear the error, then resume printing.
Load paper, and select Continue* in the display on your
PictBridge compliant device.
* To resume printing, you can also press the
RESUME/CANCEL button on the printer instead of selecting
Continue on the device.
Check the number of how many the Alarm lamp flashes and
take the appropriate action to resolve the error.
Alarm Lamp Flashes Orange
Select Stop in the display on your PictBridge compliant device
to stop printing.
Remove the jammed paper, load new paper, press the
RESUME/CANCEL button on the printer, then try printing
again.
Close the top cover on the printer.
The print head is defective or is not installed.
See Five flashes: in Alarm Lamp Flashes Orange
appropriate action.
The ink absorber is nearly full.
See Eight flashes: in Alarm Lamp Flashes Orange
the appropriate action.
The ink tank is not installed. Install the ink tank.
Replacing an Ink Tank
The ink tank is not compatible with this printer.
Printing cannot be executed because the ink tank is not
compatible with this printer.
Install an appropriate ink tank.
Orange.
Action
and take the
and take