Canon PRO-10 Series Manual page 331

If only one image is selected, only the preview appears and the Selected Images area does not
appear.
Auto Correction
4.
Make sure that Auto is selected.
5.
Click Red-Eye Correction.
6.
Click OK.
Red eyes are corrected and the
image.
Important
Areas other than the eyes may be corrected depending on the image.
Note
Click (Display Comparison Screen) to display the images before and after the correction
side by side so that you can compare and check the result.
Click Reset Selected Image to undo all corrections.
Select the Apply to all images checkbox to correct the images displayed in the Selected
Images area at one time.
Manual Correction
4.
Click Manual, then click Correct/Enhance.
5.
Click Red-Eye Correction.
Note
(Correction/Enhancement) mark appears on the upper left of the