Canon PRO-10 Series Manual page 320

Scanning and Inserting Images
You can scan and insert your favorite photos, etc. into your items. You can scan with simple steps or by
using ScanGear (scanner driver).
1.
Place the item on the platen.
2.
In the Edit area of the My Art view, control-click an image, a layout frame or the
background, then select Use Scanned Image from the displayed menu.
Note
To insert a scanned image into the background, place a checkmark beside Photo in the Select
Background dialog.
3.
From the Use Scanned Image menu, click Scan via ScanGear or Auto Scan.
When Scan via ScanGear is selected
The ScanGear screen appears. You can scan in the mode you want to use.
See the corresponding page of On-screen Manual for details on scanning.
When Auto Scan is selected
Scanning starts. Items are detected automatically.
Note
To specify the scan/save settings, click Scan Settings... from the Use Scanned Image menu.
See the corresponding page of On-screen Manual for setting procedure.
Adjusting Images
You can change the angle, position and size of the images inserted in your item. You can also enhance
images by adjusting the image brightness and contrast or by using special filters.
Changing Angle, Position and Size of Images