Canon PRO-10 Series Manual page 702

Changing Image Size
For Bordered (x1), change the image size. The margin values change according to the image size.
1.
Set the height and width in Image Size.
Set the image size by moving the sliders for height and width. The image is enlarged or reduced to the
specified image size.
Important
When a cropping frame is set for the image, the image will be cropped to the specified image size
instead of being enlarged or reduced.
Note
You can also change the image size by dragging the red frame in preview.
You can also set by entering a value directly into the text input box.
Changing Cell Spacing and Cell Size
For layouts other than Bordered (x1), change the cell spacing and cell size.
1.
Set Cell Spacing or Cell Size.
For Cell Spacing, set by moving the sliders for vertical and horizontal. All cells are enlarged or
reduced according to the cell spacing.
For Cell Size, set the cell size by moving the sliders for height and width. The spacing between all
cells is enlarged or reduced according to the cell size.
Important
When a cropping frame is set for the image, the image will be cropped to the specified image size
instead of being enlarged or reduced.
Note
You can also change the cell size by dragging the red frame or gray lines in preview.
You can also set by entering a value directly into the text input box.
Making Margins and Cell Spacing Black
You can make margins and cell spacing black.
1.
Set the margin values and cell spacing.
2.
Select the Print the margins in black checkbox.
The margins and cell spacing turn black.
Important
When text is entered and the font color is set to black, selecting the Print the margins in black
checkbox automatically changes the font color for the header, footer, page numbers and photo
information to white.
Margins may not be printed black up to the edges of the paper depending on the selected media
type.