Canon PRO-10 Series Manual page 67

* All buttons and lamps are shown lit in the above illustration for explanatory purposes.
(9) POWER lamp
Lights white after flashing when the power is turned on.
Note
POWER and Alarm lamps
You can check the status of the printer by the POWER and Alarm lamps.
- POWER lamp is off: The power is off.
- POWER lamp lights white: The printer is ready to print.
- POWER lamp flashes white: The printer is getting ready to print, or printing is in progress.
- Alarm lamp flashes orange: An error has occurred and the printer is not ready to print.
"Alarm Lamp Flashes Orange" in
- POWER lamp flashes white and Alarm lamp flashes orange alternately: An error that
requires contacting the service center may have occurred.
"POWER Lamp Flashes and Alarm Lamp Flashes Orange Alternately" in
Flashes Orange
(10) ON button
Press to turn the power on or off.
Turning the Printer On and Off
(11) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
(12) RESUME/CANCEL button
Press to cancel a print job in progress. You can press this button to release from printer error
status and resume printing, after the printer problem is resolved.
(13) Wi-Fi button/Wi-Fi lamp
Hold down to automatically set up the wireless LAN connection.
Lights or flashes blue to indicate the wireless LAN status.
Lights:
Wireless LAN connection is enabled.
Flashes:
Printing over wireless LAN. While setting up the wireless LAN, the number of flashes indicates
setup status.
(14) direct print port
Connect a PictBridge compliant device such as a digital camera to print directly.
Printing from a Device Other Than a Computer
Alarm Lamp Flashes Orange
Alarm Lamp