Canon PRO-10 Series Manual page 548

Home > Troubleshooting > Problems with Network Communication
Cannot Detect the Printer When Setting up Network Communication
Wired LAN: Check 1
U029
Cannot Detect the Printer with the Wired LAN: Check 1
Is the LAN cable connected, and are the printer and the router turned on?
Make sure that the LAN cable is connected.
Make sure that the printer is turned on.
Confirming that the Power Is On
Make sure that the router is turned on.
If the LAN cable is connected and the printer or the network device is turned off:
Turn on the printer or the network device.
After turning on the printer or the network device, it may take some time until ready for use. After a
while just turning on the printer or the network device, click Redetect on the Set Up New Printer
screen.
When the printer is detected, follow the instructions on the screen to continue to set up the network
communication.
If the LAN cable is connected and the printer and the network device are turned on:
If the printer and the network device are turned on or if the printer could not be detected after clicking
Redetect, go to check 2.
Cannot Detect the Printer with the Wired LAN: Check 2
> Cannot Detect a Printer on a Network
> Cannot Detect the Printer with the
Page top
>