Canon PRO-10 Series Manual page 63

Home > Overview of the Printer
of the Printer
Precautions for Safe Transport of the Printer
When relocating the printer, make sure of the following.
Important
When sending the printer for repair
Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
With the print head and ink tank left installed in the printer, press the ON button to turn off the power.
This allows the printer to automatically cap the print head, thus preventing it from drying.
After packing, do not tilt the box containing the printer or turn it on its side or upside down. Doing so
may cause the ink to leak during transport and cause damage to the printer.
When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to
keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1.
Turn the printer off.
2.
Confirm that the POWER lamp is off and unplug the printer.
Notice for Unplugging the Power Cord
Important
Do not unplug the printer while the POWER lamp is lit or flashing white, as it may cause
malfunction or damage to the printer, making the printer unable to print.
3.
Retract the output tray extension, then close the paper output tray and the paper
support gently.
4.
Disconnect the printer cable from the computer and from the printer, then
disconnect the power plug from the printer.
5.
Use adhesive tape to secure all the covers on the printer to keep them from
opening during transportation. Then pack the printer in the plastic bag.
6.
Attach the protective material to the printer when packing the printer in the box.
Important
When setting up the printer, always carry it with two people.
> Tips for Ensuring Optimal Printing Quality > Precautions for Safe Transport