Canon PRO-10 Series Manual page 675

Print Studio Pro Guide > Printing
S733
Printing Photos
1.
Start Print Studio Pro.
Starting Print Studio Pro
2.
Make sure that the images you want to print are displayed in the Thumbnails area
at the bottom left of the screen.
Note
Images with the checkboxes selected will be printed. Deselect the checkboxes of the images you
do not want to print.
Drag to change the order to print.
You can also change the order to print by selecting an order from the Sort By menu.
3.
In Print Settings, set Media Type, Paper Source, Print Quality, etc. according
to the printer and paper to be used.
Important
When Fine Art is selected for Media Type, a 30 mm (1.18 inches) margin is automatically left at
the top and bottom of the paper. It is recommended that you check the print area with the image
shown in print preview before printing.
When Plain Paper is selected for Media Type, the print result may become faint. In that case,
change the Media Type and print.
Note
The paper sizes and media types displayed vary depending on the selected printer.
Refer to "Art Paper Printing Guide" for the supported types of third party paper. "Art Paper
> Printing Photos