Canon PRO-10 Series Manual page 133

Home > Overview of the Printer
Specifications
General Specifications
Printing resolution (dpi)
Interface
Print width
Operating environment
Storage environment
Power supply
Power consumption
External dimensions
Weight
Print Head/Ink
Network Specifications
Communication protocol
Wired LAN
> Specifications
4800 (horizontal) X 2400 (vertical)
USB Port:
Hi-Speed USB *1
Direct Print Port:
PictBridge
LAN Port:
Wired LAN: 100BASE-TX/10BASE-T
Wireless LAN: IEEE802.11n/IEEE802.11g/IEEE802.11b *2
*1 A computer that complies with Hi-Speed USB standard is required.
Since the Hi-Speed USB interface is fully upwardly compatible with
USB 1.1, it can be used at USB 1.1.
*2 Setup possible through WPS (Wi-Fi Protected Setup) or WCN
(Windows Connect Now).
Manual Feed Tray: 13.7 inches/348.8 mm (for Borderless Printing: 14
inches/356 mm)
Rear Tray: 12.7 inches/322.2 mm (for Borderless Printing: 13
inches/329 mm)
Temperature: 5 to 35 °C (41 to 95 °F)
Humidity: 10 to 90 % RH (no condensation)
Temperature: 0 to 40 °C (32 to 104 °F)
Humidity: 5 to 95 % RH (no condensation)
AC 100-240 V, 50/60 Hz
Printing: Approx. 17 W *1
Standby (minimum): Approx. 2.3 W *1*2
OFF: Approx. 0.3 W
*1 Wireless LAN is active.
*2 The wait time for standby cannot be changed.
Approx. 27.2 (W) X 15.2 (D) X 8.5 (H) inches
Approx. 689 (W) X 385 (D) X 215 (H) mm
* With the Paper Support and Paper Output Tray retracted.
Approx. 20.0 kg (Approx. 43.9 lb)
* With the Print Head and ink tanks installed.
Total 7680 nozzles (PM/PC/Y/M/R/PBK/C/CO/MBK/GY each 768
nozzles)
TCP/IP
Supported Standards: IEEE802.3u (100BASE-TX)/IEEE802.3
(10BASE-T)
Transfer speed: 10 M/100 Mbps (auto switching)