Canon PRO-10 Series Manual page 758

Home > Troubleshooting > About Errors/Messages Displayed
U329
Alarm Lamp Flashes Orange
Alarm Lamp Flashes Orange
When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate action to
correct the error.
(A) Note the number of flashes
(B) Flashes repeatedly
Note
"Support Code" on the table below means the error number. It appears on the computer screen
with a message when an error occurs.
Support
Number of flashes/Cause
Code
1000 Two flashes:
1001 Printer is out of paper./The disc
1002 tray is not attached./Paper does
1006 not feed.
1250 Three flashes:
1261 Paper output tray is closed./Feed
1270 slot cover is opened./Manual
1300 feed tray is in the paper jam
1308 clearing position./Cannot print on
a printable disc./Paper jams.
> Alarm Lamp Flashes Orange
Action
Reload paper in the cassette or the manual feed
tray and press the RESUME/CANCEL button
on the printer.
When printing on printable discs (BD/DVD/CD,
etc.), use the disc tray supplied with this printer
("K" is on the upper side). Place a printable disc
on the disc tray, attach the disc tray to the
printer, then press the RESUME/CANCEL
button.
Placing a Printable Disc
If the paper output tray is closed, open it.
The printer resumes printing.
If the feed slot cover is opened, close the
cover slowly and press the
RESUME/CANCEL button on the printer.
The printer resumes printing.
If the rear tray is open before you load paper
on the manual feed tray, close the rear tray
slowly, press the RESUME/CANCEL button
on the printer, then load paper.
When you start printing on a printable disc,
make sure that the paper is removed from