Canon PRO-10 Series Manual page 716

(Delete Layout)
Deletes the selected layout.
Note
You can delete only the layouts you registered.
(Add Layout)
Displays the Add Layout dialog from which you can register the settings made in the Settings area
(Layout).
Name
Enter the name of the settings to be registered.
Note
You can enter up to 64 characters.
You cannot use a name and "Custom" that are already registered.
(2) Margin Settings Area
Note
Appears only when a bordered layout or an index is selected.
Page Grid, Cell Spacing and Cell Size appear only when Bordered (x2), Bordered (x4) or
Index 5x4 is selected.
Margins
Set the margin values by moving the sliders for top, bottom, left and right or by entering the values
directly into the text input box.
Note
The range of margin values varies depending on the media type and paper size.
Values to be entered into the text input box must be single-byte and with up to six decimal
places.
Alignment
Places the image in the selected position with the image size retained. When text is entered, it will
also be moved.
You can select from None, Center, Center Horizontally and Center Vertically.
Align with Page Margins
Places the image after enlarging it to the maximum size at which it can be printed in a bordered
layout.
Note
Align with Page Margins can be set only when Alignment is None.