Canon PRO-10 Series Manual page 501

For WPA/WPA2, authentication method is PSK.
Auto
The printer automatically changes its authentication method to match the access point.
Open System
In this authentication method, the communication partner is authenticated without using
WEP key even if Use Password (WEP) is selected.
Shared Key
In this authentication method, the communication partner is authenticated using the WEP
key that was set for encryption.
B
Bonjour
A service built into Mac OS X operating system to detect the connectable devices on a network
automatically.
C
Channel
Frequency channel for wireless communication. In the infrastructure mode, the channel is
automatically adjusted to match that set to the access point. This printer supports channels 1 to
13. Note that the number of channels that can be used for your wireless LAN varies depending
on the region or country.
Computer to Computer
Client computer and printer setting where wireless communication occurs on a peer-to-peer
basis, i.e., all clients in with the same SSID/network name communicate directly with each other.
No access point is required. This printer does not support ad-hoc communication.
D
DHCP server functionality
The router or the access point assigns an IP address automatically whenever the printer or the
personal computer on a network starts up.
F
Firewall
It is a system that prevents an unlawful computer access in the network. To prevent, you can
use the firewall function of a broadband router, the security software installed in the computer,
or operation system for computer.
I
IEEE 802.11b
International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of
up to 11 Mbps.
IEEE 802.11g
International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of
up to 54 Mbps. Compatible with 802.11b.
IEEE 802.11n
International standard for wireless LAN using the 2.4 GHz and 5 GHz frequency ranges. Even