Canon PRO-10 Series Manual page 762

Hide thumbs Also See for PRO-10 Series:
Table of Contents

Advertisement

1413
1414
1415
1416
1417
1418
1419
1698
Seventeen flashes:
Printer detected ink out
condition.
1699
Eighteen flashes:
Printer detected ink out
condition.
Replacing an Ink Tank
Printer detected ink out condition (The lamp on
the ink tank flashes).
If printing is in progress, stop printing, replace
the ink tank, and then print again.
To avoid printing troubles such as the mixing of
inks, this printer is designed to stop printing by
flashing the Alarm lamp orange seventeen
times when the remaining ink level in an ink
tank goes under the amount of ink required to
maintain both printer and print quality.
Note
If multiple ink lamps are flashing, check
how fast they flash.
Fast flashing (at about one second
interval) indicates the ink is empty. Slow
flashing (at about three second interval)
indicates ink is low. For details on different
flashing speeds, refer to
Status.
Printer detected ink out condition (The lamp on
the ink tank flashes).
Stop printing, replace the ink tank, and then
print again. Be sure to replace the empty ink
tank before resuming printing.
An ink tank that was once empty is installed.
Printing under the ink out condition may cause
the printing trouble such as the mixing of inks,
or a printer malfunction.
If you want to continue printing, you need to
release the function for detecting the remaining
ink level. To release this function, press and
hold the printer's RESUME/CANCEL button for
at least 5 seconds, and then release it.*
* With this operation, releasing the function for
detecting the remaining ink level is memorized.
Please be advised that Canon shall not be liable
for any malfunction or trouble which may be
caused by continuation of printing or refilling of
ink.
Note
If multiple ink lamps are flashing, check
how fast they flash.
Fast flashing (at about one second
interval) indicates the ink is empty. Slow
flashing (at about three second interval)
indicates ink is low. For details on different
flashing speeds, refer to
Status.
If the function for detecting the remaining
Checking the Ink
Checking the Ink

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents