Canon PRO-10 Series Manual page 740

Home > Printing > Printing from a Device Other Than a Computer
PictBridge Print Settings
U053
About PictBridge Print Settings
Settings on a PictBridge Compliant Device
This section describes the PictBridge function of the printer. For the print settings on a PictBridge
compliant device, refer to the instructions given in the device's instruction manual.
Note
In the following description, names of setting items are given according to those used in Canon-
brand PictBridge compliant devices. Setting item names may be different depending on the
brand or model of your device.
Some setting items explained below may not be available on some devices. When you cannot
change print settings on a device, the printer prints images as follows:
Paper size: 4" x 6"/ 10 x 15 cm
Paper type: Fast Photo
Layout: 1-up, Borderless
Date/File No. Print: Not printed
Image Optimize: The Auto photo fix function will be used for optimized printing.
The following settings can be used when printing from a PictBridge compliant device.
Paper 4" x 6"/ 10 x 15 cm, 5" x 7"*, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 10" x 12"/ 25 x
size 30 cm, A3, A3+/ 13" x 19", 14" x 17"/ 36 x 43 cm
* Can be selected only on certain Canon-brand PictBridge compliant devices. (May not
be selected depending on the device.)
Paper Default: Photo Paper Pro Platinum PT-101
type Photo:
Photo Paper Plus Glossy II PP-201
Semi-gloss*:
Photo Paper Plus Semi-gloss SG-201/Photo Paper Pro Luster LU-101
Fast Photo:
Photo Paper Pro Platinum PT-101
Plain:
A3, A4/Letter
When Paper type is set to Plain, borderless printing will be disabled even when
Layout is set to Borderless.
* Available only with a Canon-brand PictBridge compliant device. (May not be available
with some Canon-brand PictBridge compliant devices.)
Layout Default (Borderless), Index, Borderless, Bordered, 20-up*1, 35-up*2
*1 With a Canon brand PictBridge compliant device, selecting items with "i" mark allows
you to print shooting info (Exif Data) in list format (20-up) or on the margins of the
specified data (1-up). (May not be available with some Canon-brand PictBridge
compliant devices.)
*2 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a
Canon-brand PictBridge compliant device. (May not be available with some Canon-
brand PictBridge compliant devices.)
Print Default (Off: No printing), Date, File No., Both, Off
date &
file no.
Image Default (Auto photo fix)*1, On (Auto photo fix)*1, Off, Red-Eye*2
optimize *1 The scene or person's face of a shot photo is recognized and the most suitable
correction for each photo is made automatically. It makes a darkened face by backlight
> Printing from a Digital Camera > About