Canon PRO-10 Series Manual page 648

Important
On the Quality & Media, look at Media Type. If a media type other than Photo Paper Plus Glossy
II, Photo Paper Pro Platinum, Photo Paper Plus Semi-gloss, Other Glossy Paper (Margin 35), or
Other Glossy Paper is selected, you cannot select Overall or Custom.
Depending on which print quality is set on the Quality & Media, you may not be able to select
Custom.
If Overall is selected and the media type is changed to one that cannot use Overall, the clear coating
area setting is changed to Auto.
If Custom is selected and the media type or the print quality is changed to one that does not support
form composite print or form file creation, the clear coating area setting is changed to Auto.
Form Files
This function displays a list of the saved form files.
Form Name
Displays the form name.
Created date and time
Displays the form file creation date and time.
Size
Displays the paper size of the form.
Pages
Display the number of pages in the form.
Borderless (Extension)
Displays the borderless print setting of the form. When the borderless print setting is enabled, the
extension amount is also displayed.
Invert Form
Selecting Form Composite Print allows you to reverse the clear coating areas specified in the form.
No
The printer prints the data without reversing the clear coating areas.
Yes
The printer reverses the clear coating areas and prints the data.
Apply Form
Select the method for applying the form to the document pages, when Form Composite Print is selected.
Same to All Pages
The first page of the selected form is applied to all pages of the document.
Individual Page
If the page count of the form file is 2 or more, the printer matches the document and form pages in
sequence from the first page during printing.
If the document page count is larger than the form page count, the printer applies the Overall function
of Clear Coating Area to the remaining pages.
When multiple copies are printed, the number of copies that was set for the document must also be set
for the applicable form during form file creation.
Pattern
Select the pattern type and size, when Form Composite Print is selected.
The pattern is applied to areas that are not clear coated.
Delete
Deletes the form file that you selected in form files.
If the print queue contains a form composite print job, do not delete the form specified by that job.
Form Name