Chapter 2
Printer Unit (NIC) Type D1
8
15. Attach the ferrite core (small) to the USB
cable with the banding band attached in
step 14 on the right.
REFERENCE
A banding band is attached to the USB cable of
the LAN interface to distinguish from that of the
USB interface.
16. Connect the USB cable to the CN21 and
the power cable unit to the CN20 on the
main PCB.
17. Insert the cable clamp in the loop of the
banding band to secure the ferrite core
(small).
18. Secure the USB cable and the power cable
unit with the cable clamps securing the
cables of the machine.
86
Banding band
Operator's side
CN20
Operator's side
Ferrite core (small)
Banding band
Operator's side
CN21