Ricoh DD5450 Field Service Manual page 377

HELP-067
A B C D
2 0
1.
0 0 0 0
2.
● Operation procedure
1.
Call the HELP mode "H-067".
Enter "067" by the NUMERIC keys and then press the
PRINT key.
2.
Function Setting
Setting
1. Select and touch the item to be set.
2. Use the "0"and "1"NUMERIC keys to enter the value for the
desired set value.
X
3. Press the = key to store the set values.
► Setting Function
Item Value
1 0-99
A
2
B
C
D
3.
Return to the HELP mode.
Press the STOP key. The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
Chapter 8
Ink Setting
● Ink Setting
Setting
Drum revolution to detect no ink (Default:20) (If it is set to 0, no
ink error detection will be disabled.)
Pre-detach position of MASTER :ink
0
replenishment is disabled (Default)
Pre-detach position of MASTER: ink
replenishment is enabled (Master making fin-
1
ishes when no ink error is detected.) (Enabled
only when Fine start is OFF.)
Post-detach position of MASTER: ink replenishment
0
is disabled (Default)
Post-detach position of MASTER: ink replenishment is enabled
1
(Enabled only when Fine start is OFF.)
0 After master making: ink replenishment disabled (Default)
After master making: ink replenishment enabled
1 (Printing finishes when no ink error is detected.)
(Enabled only when Fine start is OFF.)
-
: Turn the power switch OFF.
using the numeric keys.
HELP Mode Function and Operation Procedures
3
HELP-067
A B C D
2 0
1.
0 0 0 0
2.
HELP-067
A B C D
2 0
1.
0 0 0 0
2.
８
375