Ricoh DD5450 Field Service Manual page 43

7. Align the center of the screwhead (red line)
with the center of the lines engraved on the
hinge plate (blue line).
8. Fix the earth wire on the scanner frame with
the screw for grounding.
Insert the lock-type cable clamp in the hole of the
frame. Connect the connector and fix the cables
with the lock-type cable clamp.
CAUTION
The cables should be fixed with the lock-
type cable clamp above the line shown in
the above picture. If they are positioned
below the line, they may contact the frame
while sliding the scanner.
9. Attach the removed covers in the following
order: front cover, side cover R, and side
cover L.
Chapter 2
Cables should be positioned above this line.
ADF DF7010
3
２
41