Chapter 2
Printer Unit (USB) Type D1
7
13. Hang the LAN ASSY by inserting the screw,
that is on the frame of the machine, in the
hole that is on the upper side of the bracket.
Secure the upper part of the bracket with
the two nuts and the lower part with the two
hexagon head screws (4×6).
IMPORTANT
Check that the USB cable of the LAN ASSY
a n d t h e p o w e r c a b l e u n i t a r e s e c u r e l y
connected.
REFERENCE
• Attach the LAN ASSY at the right edge.
• The USB cable of the LAN ASSY is connected
to the upper connector.
14. Pass the USB cable unit through the frame
opening on the operator's side.
REFERENCE
Pass the USB cable unit through the following
place.
76
Non-operator's side
Operator's side
Operator's side