Ricoh DD5450 Field Service Manual page 392

Chapter 8 HELP Mode Function and Operation Procedures
3
HELP-080
OPTION PERMIT
NG :USB FLASH DRIVE
● Operation procedure
1.
Call the HELP mode "H-080".
Enter "080" by the NUMERIC keys and then press the
PRINT key.
Check operation.
2.
1. Insert a USB flash drive that enables option permit.
X
2. Press the = key or the MASTER MAKING key. Option permit
operates .
●Once you set the OPTION PERMIT in a master USB flash
drive for OPTION PERMIT, the master USB flash drive can
permit option only for the machine in which the USB flash
drive is inserted.
(The USB flash drive is dedicated for the machine with the serial
no. Cannot set the OPTION PERMIT for any other machines.)
●When initializing HELP inn HELP-027 in case you have lost the
USB flash drive dedicated for OPTION PERMIT, insert
another USB flash drive and press the
MAKING key to operate the OPTION PERMIT. Then the
setting information will be saved in the USB flash drive as a
backup file.
Therefore if the option setting information is deleted by
initializing HELP in HELP-027, you can operate the
OPTION PERMIT using the backuped data saved in the
USB flash drive.
3.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
390
Setting function
● Setting Option Permit
X
= key or MASTER
: Turn the power switch OFF.
using the numeric keys.
HELP-080
OPTION PERMIT
NG :USB FLASH DRIVE
HELP-080
OPTION PERMIT
NG :USB FLASH DRIVE