Chapter 2
Printer Unit (NIC) Type D1
8
7. Remove the four screws to remove the feed
inlet cover.
REFERENCE
When the USB cable is already passed
through, it is easier for you to work if you
remove the cable clamps with a long nose
pliers from the feed inlet cover.
8. Connect the USB cable to the upper
connector of the LAN ASSY.
9. Pass the USB cable and the power cable
unit through the frame opening.
10. Pass the USB cable and the power cable
unit through the frame opening on the
operator's side.
84
Paper infeed side
Non-operator's side
Non-operator's side
Operator's side