Ricoh DD5450 Field Service Manual page 31

4. Grip the upper drum shaft with your other
hand, and pull the drum out towards you
while slightly lifting the near end of the drum.
WARNING
● Hold the drum unit level with both hands.
● Do not press the surface of the drum
unit or scratch it with your fingers.
● Before you place the drum unit down,
make sure that the place you are
placing it is free of any objects and is a
flat, solid surface.
5. Move the lever with a hand to open and
close the master clamp once or twice.
6. Hold the drum level and place the drum
guide roller onto the rail in the machine.
7. Release the upper drum shaft, and gently
push the drum in until it stops while holding
the drum level by slightly lifting the near end
of the drum.
Chapter 2 Machine Installation
1
２
29