Preparing The Drum - Ricoh DD5450 Field Service Manual

Chapter 2 Machine Installation
1
7. Gently close the scanner unit.
8. The roll master is automatically set.

(5) Preparing the Drum

1. Open the front cover toward you.
2. Make sure that the LED goes on.
If not, press the drum removal button.
WARNING
● Do not touch the drum or rollers when
you operate the drum removal button.
● Do not put hands inside machine while
it is operating. Hands could get caught
up or crushed.
3. After the drum stops, pull out the drum toward
you while pulling the drum release lever.
28