Ricoh DD5450 Field Service Manual page 21

4. Control Panel
1
6
No. Name
1 Clip holder
2 Pen holder
3 RESET key
4 Control keys
PRINT DARKNESS keys Controls print darkness.
PRINT POSITION keys
PRINT SPEED keys
5 Power switch
6 LAMP
7 LCD (touch panel)
8 HOME key
9 CLEAR key
10 NUMERIC keys
X
11 key
=
12 MASTER MAKING key
13 PRINT key
14 STOP key
15
TEST PRINT key
2 3
7 8
Function
Returns setting to standard mode. Setting not stored is cleared.
Controls print position (vertical).
Controls print speed.
Press to turn the power ON and OFF.
The power switch lamp lights up when the power is ON, goes out
when it is OFF, and blinks when the machine is in energy save
mode.
Blue (lights up): Operating
Whole LAMP is blinking in red.: Error message is displayed.
Lower part of LAMP is blinking in red.: Message replacing
consumables is displayed.
Displays current settings such as number of printed sheet.
Touch to change settings. Displays error messages in case of error.
The main screen will be displayed when this key is pressed.
Returns the number of prints and the entered values to 0.
Enters the number of prints.
Enters the number of prints and sets in batch printing/sequential
batch print.
Starts making a master. Master making cannot be performed during
printing. Clear the number of prints before master making.
Starts printing. Master making is not performed. Printing cannot start
when the light of the START key is red (When confidential function is
set, when a master is not set on the drum, when error is displayed,
when the number of prints is not entered.)
Stops printing. When this key is pressed during making a master,
the machine stops after making a master.
Prints 1 copy to check the image position and density. The machine
keeps printing while this key is pressed.
Chapter 1 4 Part Names and Their Functions
4
9 10 11 12 13 14
5
15
19
１