Ricoh DD5450 Field Service Manual page 339

HELP-030
TEST PATTERN
TEST PATTERN 1
TEST PATTERN
2
TEST PATTERN 3
TEST PATTERN
4
TEST PATTERN 5
TEST PATTERN
6
TEST PATTERN 7
● Operation procedure
1.
Call the HELP mode "H-030".
Enter "030" by the NUMERIC keys and then press the PRINT
key. The test pattern selection display appears.
2.
Select test pattern.
1. Select and touch the test pattern to be printed. HELP
automatically exits and the standby screen for making
master and printing appears to make up the test pattern.
● Turn off the power or make a reset to exit from this mode.
● To change the test pattern, enter HELP-030 again.
● The master size is the size of the paper selected.
Test Pattern 1:When using A3 Machine and A3 Drum
● The test pattern consists of the diagonal line pattern,
the maximum width (horizontal) lines at 7 mm, 8
mm,182 mm and 210 mm from the lead edge.
The square {200 (horizontal) × 400 (vertical) mm}
and lines dividing this squares (100×200 each).
Chapter 8 HELP Mode Function and Operation Procedures
3
(1) Test Pattern
● Printing the Test Pattern.
Set to "4. B = 0: Upper cover switch disabled" and
"4. C =0: Scanner disabled" of HELP-061.
The Test Pattern can be made up and printed with the scanner
opened.
HELP-029 unused
HELP-030
TEST PATTERN
TEST PATTERN
1
TEST PATTERN 2
TEST PATTERN
3
TEST PATTERN 4
TEST PATTERN
5
TEST PATTERN 6
TEST PATTERN
7
HELP-030
TEST PATTERN
TEST PATTERN
1
TEST PATTERN 2
TEST PATTERN
3
TEST PATTERN 4
TEST PATTERN
5
TEST PATTERN 6
TEST PATTERN
7
edge 210 mm
edge 182 mm
edge 8 mm
edge 7 mm
100 mm
100 mm
200 mm
400 mm
edge 10 mm
８
337