Ricoh DD5450 Field Service Manual page 364

Chapter 8 HELP Mode Function and Operation Procedures
3
HELP-055
COMPLETION BUZZER TEST
● Operation procedure
1.
Call the HELP mode "H-055".
Enter "055" by the NUMERIC keys and then press the
PRINT key.
2.
Change the screen.
Touch the arrow on the screen lower right three times to switch
to Page 4.
3.
Check buzzer tone. (Screen: page 4)
Completion Buzzer Tone Test
● Press the following NUMERIC keys.
The corresponding tone sounds.
● Press the "1" key: "entry confirmation" completion tone sounds.
● Press the "2" key: "base" completion tone sounds.
● Press the "3" key: "normal end" completion tone sounds.
● Press the "4" key: "ready" completion tone sounds.
● Press the "5" key: "disable" completion tone sounds.
● Press the "6" key: Soft warning completion tone 1 sounds.
● Press the "7" key: Soft warning completion tone 2 sounds.
● Press the "8" key: Loud warning completion tone sounds.
4.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
362
(3) Buzzer Setting
Page 4:
● Operation check
COMPLETION BUZZER TEST (HELP-055-1 B=1)
: Turn the power switch OFF.
using the numeric keys.
(5 pages in total)
HELP-055
A B C D
0 1 0 0
1.
0 1 1 0
2.
0 6
3.
0 6
4.
HELP-055
COMPLETION BUZZER TEST
A B C D
0 6
5.
Touch