Ricoh DD5450 Field Service Manual page 362

Chapter 8 HELP Mode Function and Operation Procedures
3
2.
Item Value
3
4
5
3.
Setting (Buzzer ON/OFF and buzzer volume adjustment) (Screen: page 2)
Touch the arrow on the screen lower right in step 2 to
switch to Page 2.
Setting
1. Select and touch the item to be set.
2. Use the "0"and "1" NUMERIC keys to enter a 4-place
binary value for the desired correction value.
X
3. Press the = key to store the set value.
► Setting function
Item Value
00-99
6 sec-
onds
7
00-99
8 sec-
onds
9
4.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
360
1-15 Operation buzzer volume adjustment: 15 steps (default: 6)
1-15 Completion buzzer volume adjustment: 15 steps (default: 6)
1-15 Error buzzer volume adjustment: 15 steps (default: 6)
Message remain warning buzzer interval: disabled at 00 second.
(Error message: The LED lamp blinks in red.)
0 "entry confirmation" tone sounds
1 "base" tone sounds
2 "normal end" tone sounds
3 "ready" tone sounds
4 "disable" tone sounds
5 Soft warning tone 1 sounds
6 Soft warning tone 2 sounds
7 Loud warning tone sounds
(Supplying consumable) Message remain warning buzzer interval: disabled at
00 second
(Supplying consumable message: Lower part of the LED lamp blinks in red.
"entry confirmation" tone sounds
0
1 "base" tone sounds
2 "normal end" tone sounds
3 "ready" tone sounds
4 "disable" tone sounds
5 Soft warning tone 1 sounds
6 Soft warning tone 2 sounds
7 Loud warning tone sounds
: Turn the power switch OFF.
using the numeric keys.
Setting
HELP-055
BUZZER SETTING
A B C D
0 0
6.
0
7.
0 0
8.
0
9.
Setting
Message remain warning
buzzer
(Supplying consumable) Message
remain warning buzzer