Ricoh DD5450 Field Service Manual page 301

HELP-002
TOUCH PANEL CALIBRATION
1. 944, 133
2. 47, 964
● Operation procedure
1. Call the HELP mode "H-002".
Enter "002" by the NUMERIC keys and then press the
PRINT key.
2.
Touch panel calibration/check
For "Calibration", press the MASTER MAKING key. Go to
step 3 .
For "Check", press the HOME key. Go to step 4 .
3.
Touch panel calibration.
1. Touch the center point of the circle on the panel upper left.
2. The circle moves to the lower right. Touch the center point
again. (Calibration completed)
X
3. Press the = key to store calibration.
REFERENCE
● Press the STOP key to cancel calibration.
Touch panel check
4.
1. When pressing the HOME key in step 2, the cross
cursor appears on the panel.
2. Check that the cross cursor follows the stylus pen
movement.
5.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode: Enter the desired mode number
Chapter 8 HELP Mode Function and Operation Procedures
3
Touch Panel Calibration
Calibrating the coordinates and checking operation of the touch
panel.
:To exit the HELP mode
using the numeric keys.
HELP-002
TOUCH PANEL CALIBRATION
1. 944, 133
2. 47, 964
1. Touch the center point
2. Touch the center point
Cross cursor
+
186, 92
８
299