Ricoh DD5450 Field Service Manual page 44

Chapter 2 ADF DF7010
3
10. Place the sheet [A] alongside the edges
of the jump stand on the left and the scale
on the far side, as shown in the picture.
Remove two release papers [B] on the left
of the sheet.
11. Close the ADF and affix the double-sided
tapes on the left of the sheet to the ADF.
12. Remove the release paper [A] on the right of
the sheet. Affix the sheet [B] to the ADF while
pulling it to prevent slackening.
13. Affix the document glass cleaning [B] on the
machine as shown in the picture so that it does
not come into contact with the magnet [A] of the
ADF.
14. The ADF and scanner should be parallel each
other..
42
Should be parallel