Ricoh DD5450 Field Service Manual page 346

Chapter 8 HELP Mode Function and Operation Procedures
3
HELP-042
SCANNER READ WIDTH(mm)
000.0
5.
SCANNER READ LENGTH(mm)
000.0
6.
SCANNER MOVE RANGE(%)
+0.0
7.
SHADING POSITION(mm)
+0.0
8.
● Operation procedure
1.
Call the HELP mode "H-042".
Enter "042" by the NUMERIC keys and then press the
PRINT key.
2.
Change the screen.
Touch the arrow on the screen lower right once to switch
to Page 2.
3.
Adjust the scanner read.
Adjustment
1. Select and touch the item to be adjusted.
Scanner read width
Scanner read length
Scanner move range
Shading position
2. Enter the value by the NUMERIC keys or change
the value by the PRINT POSITION
● Press the HOME key to invert "+" and "-"
of the selected set value.
● Press the C (clear) key to return the selected set
value to the value before change.
X
3. Press the = key to store the set value.
4.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
344
(2) Scanner Read Adjustment
Page 2:
● Adjustment.
Scanner read width
Scanner read length
Scanner move range
Shading position
keys.
: Turn the power switch OFF.
using the numeric keys.
(2 pages in total)
HELP-042
SCAN HORIZONTAL MAGNIFICATION(%)
−0.6
1.
SCAN VERTICAL MAGNIFICATION(%)
+0.3
2.
SCAN LEAD EDGE START POSITION (mm)
+0.0
3. Touch
SCANNER HORIZONTAL READING CENTER(mm)
+0.0
4.
HELP-042
SCANNER READ WIDTH(mm)
000.0
5.
SCANNER READ LENGTH(mm)
000.0
6.
SCANNER MOVE RANGE(%)
+0.0
7.
SHADING POSITION(mm)
+0.0
8.