Ricoh DD5450 Field Service Manual page 348

Chapter 8 HELP Mode Function and Operation Procedures
3
HELP-043
ADF READ WIDTH(mm)
000.0
5.
ADF READ LENGTH(mm)
000.0
6.
ADF FEED RANGE(%)
+0.0
7.
ADF TRAIL EDGE END POSITION(mm)
+0.0
8.
● Operation procedure
1.
Call the HELP mode "H-043".
Enter "043" by the NUMERIC keys and then press the
PRINT key.
2.
Change the screen.
Touch the arrow on the screen lower right once to switch
to Page 2.
Adjust the ADF read.
3.
Adjustment
1. Select and touch the item to be adjusted.
ADF read width
ADF read length
ADF feed range
ADF trial edge end position
2. Enter the value by the NUMERIC keys or change
the value by the PRINT POSITION
● Press the HOME key to invert "+" and "-"
of the selected set value.
● Press the C (clear) key to return the selected set
value to the value before change.
X
3. Press the = key to store the set value.
4.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
346
(2) ADF Read Adjustment
Page 2:
● Adjustment.
ADF read width
ADF read length
ADF feed range
ADF trail edge end position
keys.
: Turn the power switch OFF.
using the numeric keys.
)
(2 pages in total
HELP-043
ADF READ WIDTH(mm)
−0.6
1.
ADF READ LENGTH(mm)
+0.3
2.
ADF FEED RANGE(%)
+0.0
3.
Touch
ADF TRAIL EDGE END POSITION(mm)
+0.0
4.
HELP-043
ADF READ WIDTH(mm)
000.0
5.
ADF READ LENGTH(mm)
000.0
6.
ADF FEED RANGE(%)
+0.0
7.
ADF TRAIL EDGE END POSITION(mm)
+0.0
8.