Ricoh DD5450 Field Service Manual page 337

HELP-027
INITIALIZE
1 :013
2 :010
3 :000000077
● Operation procedure
1.
Call the HELP mode "H-027".
Enter "027" by the NUMERIC keys and then press the
PRINT key.
2.
Check data.
Machine-specific codes and the manufacturing number are
displayed.
MODEL/AREA CODE
MACHINE CODE
SERIAL NUMBER
3.
Initialize HELP contents.
Touch the arrow on the screen lower right in step 2 to display
the INITIALIZE screen on Page 2.
Initialize the contents of HELP.
X
Press the = key and C (clear) key at the same time.
● After initialization, enter the adjustment values indicated on
the label. Then confirm the value in HELP-034.
● If EEPROM requires replacement, first initialize the HELP
contents and enter the adjustment values indicated on the
HELP label. Then confirm the value in HELP-034.
● If the machine-specific code and the machine serial number
are not displayed on Page 1, HELP contents cannot be
initialized.
● If any option in HELP-80 is permitted, a master
for option permitted is required after initializing HELP.
DRIVE
In case of losing
the backup of the setting information in other
using HELP-80 before initializing HELP.
DRIVE
5.
→ Press the STOP key. The HELP mode selection display will reappear.
Step
Chapter 8
Initializing HELP Contents
Page 1:
● Check data.
MODEL/AREA CODE
MACHINE CODE
MANUFACTURING NUMBER
Page 2:
● Initialize HELP contents.
for option permitted, store
USB FLASH DRIVE
USB FLASH
HELP Mode Function and Operation Procedures
3
(2 pages in total)
HELP-027
INITIALIZE
1 :013
2 :010
3 :000000077
HELP-027
INITIALIZE
1 :013
2 :010
3 :000000077
Touch:
to Page 2
HELP-027
INITIALIZE
INITIALIZE
USB FLASH
８
335