Ricoh DD5450 Field Service Manual page 324

Chapter 8 HELP Mode Function and Operation Procedures
3
HELP-014
VERTICAL REGISTRATION SELECTION
REGISTRATION ADJUST :LEFT
435
1.
REGISTRATION ADJUST : RIGHT
2.
1120
● Operation procedure
1.
Call the HELP mode "H-014".
Enter "014" by the NUMERIC keys and then press the
PRINT key.
2.
Change the screen.
Touch the arrow on the screen lower right once to switch to
Page 2.
3.
Check the adjustment values.
● Use HELP-030 for adjustment.
► Adjustment values
Item
1 REGISTRATION ADJUST : RIGHT
2 REGISTRATION ADJUST : LEFT
4.
Return to the HELP mode.
Press the STOP key. The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number
322
(1) Adjusting/Checking the Vertical Registration Section (2 pages in total)
Page 2:
● Display of adjustment values.
REGISTRATION ADJUST : RIGHT / REGISTRATION ADJUST : LEFT
Sensors Adjustment value (mm)
350-799
801-1250
: Turn the power switch OFF.
using the numeric keys.
HELP-014
VERTICAL REGISTRATION SELECTION
VERTICAL REG. MOTOR
1 :VERTICAL REG. CENTER SENSOR
1 :VERTICAL REG .ENCODER SENSOR
1 :VERTICAL REG. LIMIT SENSOR
Touch
HELP-014
VERTICAL REGISTRATION SELECTION
REGISTRATION ADJUST : LEFT
435
1.
REGISTRATION ADJUST : RIGHT
2.
1120