HELP-004
REPLENISH INK
● Operation procedure
1.
Call the HELP mode "H-004".
Enter "004" by the NUMERIC keys and then press the PRINT
key.
Check ink replenishment.
2.
Check the following operations.
1. The ink roller moves down and the drum starts rotating.
2. While the ink level is detected, ink is replenished.
3. If ink is present, LED on the ink detection PCB lights up.
4. Ink replenishment stops and the drum stops at the drum removal position.
REFERENCE
● The drum rotates at the print speed set on the operation panel.
3.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode: Enter the desired mode number
Chapter 8
HELP Mode Function and Operation Procedures
3
Checking Ink Replenishment
While the ink level is detected, ink is replenished.
:Turn the power switch OFF.
using the numeric keys.
HELP-004
REPLENISH INK
8
303