Measurement Option Settings - Konica Minolta CM-26dG Instruction Manual

„ Measurement Option Settings
To set measurement options, select "Measurement setup" from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options.
• Specular Component : SCI (incl. reflected light) / SCE (excl. reflected light) / Simultaneous SCI+SCE measurement
• UV (100%/0%/UVC) : 100%: Measurement with a light source containing 100% UV components / 0%: Measurement with
a light source containing no UV components / UVC: UV control
• Auto average (1 to 10) : Specify the number of measurements for auto averaging.
• Manual average (1 to 30) : Specify the number of measurements for manual averaging.
• Manual average option : Select the save method when performing manual averaging.
• SMC average option : Select the save method when performing SMC average measurement. (When SMC function is ON)
• SMC : Remove outliers beyond the threshold before performing measurement.
• SMC Threshold : Set the threshold for SMC measurement.
• SMC Times (3 to 10) : Set the number of measurements to perform when performing SMC measurement.
Operating Procedure
1
Press [MENU], and then use [◀] or [▶] to display the
<Measurement cond.> menu screen.
Memo
To return to the previous screen, press [MENU] or [ESC].
2
Use [▲] or [▼] to move the cursor to "Measurement
setup", and then press the [Confirmation] key.
The <Measurement setup> screen is displayed.
3
After setting the measurement conditions, press the
[ESC] to return to the previous screen.
Start the procedure from the measurement screen.
3
84