Measurement In Ambient Light Mode - Konica Minolta CL-70F Operating Manual

5-2

Measurement in Ambient Light Mode

Select mbient Light Mode when ta ing measurements of natural light sunlight),
and continuous light sources such as L
NOTICE
Do not look directly into sunlight or other strong light when measuring. It may cause
severe eye damage or even loss of vision.
Operation
1.
On the Measurement screen, touch the [Measuring Mode] icon
and select the [Ambient Mode] icon on the next screen.
Select the measuring mode.
Measurement Screen
2.
Touch the [OK] button.
Confirms and returns to the Measurement screen.
To return to the Measurement screen without confirming, touch the Cancel button.
5. Measuring Light Sources [Measurement Screen]
, tungsten lamps and fluorescent lights.
Measuring Mode Selection Screen
utton Cancel
61
( P22)
utton