Table of Contents
Advertisement
dc_BA.boo Seite 320 Mittwoch, 20. Mai 2009 10:17 10
Practical advice
Changing bulbs
6 Clamps
Unhook booth clamps 6 and remove
the bulb.
Insert the new bulb so that the bulb
socket fits into the opening and that it
is seated properly.
320
Fasten both clamps 6.
Connect both connectors 5 to the
bulb.
Install cover plate 4 and cover 2.
Replacing the bulbs in the main-beam
headlamps
The cover plates on the rear of the head-
lamps are accessible via the respective
wheel arch.
Turn the steering to full lock so that
that wheel faces outboard to the side
of the vehicle on which the bulb needs
to be changed.
1 Fastening screws
2 Cover
Remove fastening screws 1 of the
cover in the wheel arch using the angle
screwdriver provided and remove
cover 2.
Advertisement
Table of Contents
