Table of Contents
Advertisement
dc_BA.boo Seite 237 Mittwoch, 20. Mai 2009 10:17 10
Display messages
The on-board computer shows warnings or
malfunctions in the multi-function display.
Certain messages are accompanied by a
warning tone or a continuous tone.
High-priority messages are highlighted in
red in the multi-function display. These
messages are printed in red font in the ta-
bles which follow.
Please respond in accordance with the
messages and follow the additional notes
in this Owner's Manual.
Some low-priority messages go out af-
ter a few seconds.
You can confirm low-priority messages
that do not go out automatically, using
one of the buttons è, ÿ, ‚ or
ƒ on the multifunction steering
wheel or the reset button.
You cannot confirm some high-priority
messages as described above. These
messages are displayed continuously
in the multi-function display until the
causes of the faults have been reme-
died.
If you select the message memory menu in
the on-board computer ( page 127), you
can scroll through the stored messages.
If you stop the vehicle, please observe the
notes on SBC Stop ( page 168),
SBC Hold ( page 172) and parking
( page 64).
Practical advice
Display messages
G
Risk of accident
No messages can be displayed if there is a
malfunction in the instrument cluster
and/or the multi-function display.
You will not then be able to see information
about the vehicle status, such as the speed
and outside temperature, indicator/warning
lamps, malfunction/warning messages or
system failures. The vehicle's handling char-
acteristics may be affected.
237
Advertisement
Table of Contents
