Table of Contents
Advertisement
dc_BA.boo Seite 215 Mittwoch, 20. Mai 2009 10:17 10
Switch on the ignition.
Check that you can see the standard
display in the right-hand multi-function
display ( page 117).
Press the ƒ or ‚ button on the
steering wheel repeatedly until you see
in the multi-function display the tyre
pressure of each tyre or the following
message:
Tyre pressure displayed only after
driving for a few minutes
Press the reset button ( page 43).
The following message will appear in
the left-hand multi-function display:
Monitor current tyre pressure?
Press the æ button.
The following message will appear in
the left-hand multi-function display:
Tyre pressure monitor reactivated
The tyre pressure monitor will now
monitor the tyre inflation pressure val-
ues of all four tyres.
Afterward, the following message will
appear in the multi-function display:
Tyre pressure displayed only after
driving for a few minutes
This message appears until the individ-
ual inflation pressure are matched with
the tyres. The individual values are then
displayed.
Operation
Tyres and wheels
If you now wish to restart the tyre pressure
monitoring system:
Press the ç button.
When the following message appears in
the left-hand multi-function display:
Reactivate tyre pressure monitor
after correcting tyre pressure
or
Please correct the tyre pressure
Check the pressure of each tyre and
correct it if necessary.
Restart the tyre pressure monitoring
system.
215
Advertisement
Table of Contents
