Table of Contents
Advertisement
dc_BA.boo Seite 249 Mittwoch, 20. Mai 2009 10:17 10
Left display
Right display
Reactivate
after correcting
tyre pressure
tyre pressure
monitor
SBC H
SBC Hold
Cannot be
activated
See Own. Man.
SBC S
SBC Stop
Cannot be
activated
See Own. Man.
Possible cause/conse-
Possible solution
quence
A tyre pressure warning mes-
sage appeared.
The yellow tyre pressure warn-
ing lamp comes on and you
have not reactivated the sys-
tem since the last tyre pressure
warning message.
SBC Hold cannot be activated.
SBC Stop cannot be activated.
Practical advice
Display messages
Activate the tyre pressure monitoring system
( page 214) after correcting the tyre pressure values.
Check the activation conditions for:
SBC Hold ( page 172)
SBC Stop ( page 168)
Close the bonnet.
Close the driver's door.
Start the engine.
Release the parking brake.
Switch off consumers that are not required, e.g. interior
lighting.
SBC Hold or SBC Stop can be reactivated as soon as the
voltage is sufficient.
249
Advertisement
Table of Contents
