Table of Contents
Advertisement
dc_BA.boo Seite 187 Mittwoch, 20. Mai 2009 10:17 10
Installing/removing the tonneaux
Driver's side only: Move the steering
wheel to its lowest position
( page 53).
Move both seats in the most rearward
position.
Passenger-side tonneau shown
1 Tensioning lever
2 Tonneau
3 Latch
4 Recess
Controls in detail
Features
Turn tensioning lever 1 in the direc-
tion of arrow to its stop.
Hold tonneau 2 above the cabin.
Insert the two latches 3 of the ton-
neau into the recesses 4 on the cen-
tre spar.
Push tonneau 2 against the centre
spar to fully insert the latches 3.
Lower the outboard side of tonneau 2
to its "rest" position, whilst maintaining
pressure against the centre spar.
187
Advertisement
Table of Contents
