Settings And Setting Procedures; Items To Set - Omron PROFINET NX-PNC202 User Manual

9 Setting Up the PROFINET Coupler Unit
9-1

Settings and Setting Procedures

As examples, this section describes the PROFINET Coupler Unit setting items and procedure and the
settings that are required to access IO data in Profinet IO Devices from a third party PROFINET IO
Controller. For other settings and setting procedures, refer to the operation manual for the Sysmac Stu-
dio that you will use.
9-1-1

Items to Set

The settings that are used to access IO data in the IO PROFINET Coupler Unit from a third party
PROFINET IO Controller can be divided into two areas:
• NX-IO Units data
• PROFINET data
NX-IO Units Data
This data is set using Sysmac Studio.
Setting
Setting IO Device Terminal
Configuration and Operation
Settings
PROFINET Data
This data is set using a configuration tool such as the OMRON Network Configurator.
Setting
Setting PROFINET IO Device
Name
Setting PROFINET IO Data
Allocate the IO Data
9 - 2
Adjust the settings of the IO Device Terminal with the configuration and opera-
tion settings of the NX Units and PROFINET Coupler Unit using
dio
.
Supported
Configure the Profinet IO Controller to connect to the PROFINET Coupler Unit
using a GSDML file.
Allocate the IO Data to the IO Controller CPU's variables.
NX-series PROFINET Coupler Unit User's Manual (W623)
Description
Description
Sysmac Stu-