Omron PROFINET NX-PNC202 User Manual page 146

7 Wiring
Precautions for Safe Use
• Do not press the flat-blade screwdriver straight into the release hole. Doing so may break the
terminal block.
NG
• When you insert a flat-blade screwdriver into a release hole, press it down with a force of 30
N max. Applying excessive force may damage the terminal block.
• Do not tilt or twist the flat-blade screwdriver while it is pressed into the release hole. Doing so
may break the terminal block.
NG
• Make sure that all wiring is correct.
• Do not bend the cable forcibly. Doing so may sever the cable.
Removing a Terminal Block
1
Press the lock lever on the terminal block and pull out the top of the terminal block to remove it.
Lock lever
Terminal block
7 - 20
OK
NG
NX-series PROFINET Coupler Unit User's Manual (W623)