Omron PROFINET NX-PNC202 User Manual page 170

9 Setting Up the PROFINET Coupler Unit
Uploading IO Device Terminal Settings through the USB Port on the
PROFINET Coupler Unit
You can connect the Sysmac Studio to the USB port on the PROFINET Coupler Unit and transfer the
settings information to the Sysmac Studio from the IO Device Terminal. With some Support Software,
you can connect through Ethernet or with any other method except for a USB port. Refer to the opera-
tion manual for the Support Software for details.
Use the following procedure to upload the settings.
1
Connect the Sysmac Studio to the peripheral USB port on the PROFINET Coupler Unit and
place it online.
2
Right-click the PROFINET Coupler Unit in the Edit IO Device Terminal Configuration Tab Page,
and select Coupler Connection (USB)  Transfer from Coupler.
An execution confirmation dialog box is displayed.
3
Click the Yes button.
The configuration information, Unit operation settings, and Unit application data of the IO Device
Terminal setting information are transferred.
9 - 14
NX-series PROFINET Coupler Unit User's Manual (W623)