Omron PROFINET NX-PNC202 User Manual page 258

12 Troubleshooting
Resetting the Errors in All Units in the Profinet IO Device Terminal at
the Same Time
1
Connect the computer on which the Sysmac Studio is installed to the peripheral USB port on the
PROFINET Coupler Unit and go online.
2
Select Troubleshooting from the Tools Menu while online. You can also click the Trouble-
shooting button in the toolbar.
The following Troubleshooting Dialog Box is displayed.
The current Controller errors are displayed on the Controller Errors Tab Page (observations and
information are not displayed).
3
Click the Reset All button.
The errors are reset. Any errors for which the causes remain are displayed again.
12 - 34
NX-series PROFINET Coupler Unit User's Manual (W623)